GULLWOLF Damaged Screw Extractor – Remover for Stripped Head Screws Nuts & Bolts

Hey guys, Welcome to our store!

Instructions:

1 – Set the drill to reverse and use a slow speed at all times – Use the drill end of the bit to create a round hole in the screw/bolt head by applying a good amount of pressure. Your drill should be in “REVERSE” during this process.

2 – Start with the drill bit/burnishing tip and drill down to create a hole – Flip the bit

3 – Switch the bit to the extraction tip – Use the extractor side (Spiral) to remove the screw/bolt. Your drill should be in “REVERSE” during this process. Apply a slow and constant downward pressure on the screw/bolt and move it at a low speed.

Product Information：

1. Material – HSS steel, titanium plating on the surface

2. Shank Type – Hex Shank

3. Size – 0# / 1# / 2# / 3# / 4#

4. Scope of Application – 2-3mm / 3-5mm / 4-8mm,5-10mm, 6-12mm